Hi-Vol TPU

Abrasion-Resistant TPU Supply Hose

Hi-Vol TPU™  is an extruded-through-the-weave, thermoplastic polyurethane (TPU) hose that provides excellent abrasion resistance, reduced weight, and improved kink resistance in comparison to rubber, as well as UV and ozone resistance. The smooth finish allows for easier deployment and retrieval.

Hi-Vol TPU is the next generation of supply hose.

  • Superior Abrasion Performance
    TPU cover increases abrasion resistance, eliminates additional weight issues caused by water pick up during use, and provides exceptional chemical resistance.
  • Exceeds Standards
    HI-Vol TPU is manufactured to meet or exceed the NFPA 1961 standard.
  • Minimized Friction Loss
    Extruded-through-the-weave TPU construction and ultra- smooth liner minimize friction loss, improving water flow.
  • Compact Design
    Improved packability takes up less room in the hose bed, providing easier access when every second matters.
  • Hi-Vis Safety Colors
    Green and orange colors available. Provides excellent efficiency and enhanced visibility on the fireground.
  • Available in 4” and 5” Diameter Supply

Download Hi-Vol TPU Flyer »

Hi-Vol TPU Specifications:
Size Pressure
Service Proof Burst
Bowl Size Weight
Coil Diameter
inch mm psi kpa psi kpa psi kpa inch lbs kg inch mm
4 100 200 1400 400 2800 600 4200 4-5/16 75 34.0 22 560
5 125 200 1400 400 2800 600 4200 5-3/8 94 42.6 26 660
Technical Data:
Outer Thermoplastic Polyurethane
Inner Hose Reinforcement 100% synthetic circular woven
Lengths 25’, 50’, 100’ coupled
Lengths Uncoupled up to 660’ untested
Factory Installed Couplings Storz or expansion ring
Temperature Range -58° to 158°